Help with installation

[benjamin_geology]

hi, im new here and i want to know how install the 2.5.5 version of sen2cor, i try to install but at the moment to make the correction, have a lot of ERROR.
please help.

Thanks

[falahfakhri]

Please have a look at this post,

Sen2cor 2.4.0 on SNAP 6.0

This is what works for my configuration. I previously had sen2cor 2.3 and previous versions installed as well, also older versions of SNAP which I then updated to version 6. So this might also be the case for most of the users. Please note: These instructions were originally written for sen2cor 2.4 but they simply describe a clean install of a new version and should basically work with later ones as well. If you didn’t have SNAP or sen2cor installed before, you can skip steps 1 and 2, but if …

and this post,

Sen2Cor 2.5.5, How To Install

please see these detailled instructions here: Sen2cor 2.4.0 on SNAP 6.0 If you don’t want to use the SNAP gui, you can add the path of L2A_process to your system’s PATH (see here) and call it from the command line as described here: Sen2Cor-02.05.05-win64 - AttributeError: 'L2A_Tables' Object has no attribute '_L2A_Tile_PVI_File'

[benjamin_geology]

thanks for the help, ultimate thing, how can verify the archive of exit and check if the atmospheric correction was successuful?

[falahfakhri]

Please take a look at this post

How to process image after Sen2cor opertaion

After unzip your S2 image in your folder, by applying unzip in here, you will get this folder, [image] Drag and drop this folder in your SNAP product explorer [image] Then after applying sen2cor you’ll get the following result in your same folder, the result is named, [image] This result is BOA corrected, You could now continue to process your data according to your procedure and goal, there is no need to zip the final result again.